HB防爆钢丝绳电动葫芦 HB explosion-proof wire rope electric hoist 防爆钢丝绳电动葫芦根据GB3836.1-2000《爆炸性气体环境用防爆电气设备第一部分：通用要求》及 GB3836.2-2000《爆炸性气体环境用防爆电气设备第二部分：隔爆型“d”》的规定，电机、电器为隔爆型，防爆级别为ExdⅡCT4时，运行机构进行防火花处理。整机符合JB/T10222-2001《防爆钢丝绳电动葫芦》的规定，防爆等级分别为ExdⅡBT4、ExdⅡCT4。本机可与车间固定悬挂轨道配合单独使用，也可与LXB防爆电动悬挂单梁、LB防爆电动单梁、防爆葫芦双梁配套使用。其起重量为1t—32t。工作环境温度为-20℃—40℃。卫华的防爆产品分三类：除了以上的气体防爆外，还有粉尘防爆，煤安类防爆，以适用于不同的防爆场所。 Explosion-proof electric hoist wire rope according to GB3836.1-2000 "explosive gas environment with explosion-proof electrical equipment part 1: general requirements and GB3836.2-2000" explosive gas environment with explosion-proof electrical equipment in the second part: the flameproof "d", "regulations, for the flameproof motors, electrical appliances, explosion-proof level for Exd Ⅱ CT4, fire operation agencies spent processing. Machine in accordance with JB/T10222-2001 "explosion-proof electric hoist wire rope" regulation, explosion-proof grade respectively Exd Ⅱ BT4, Exd Ⅱ CT4. This machine can be used alone, with fixed suspension track or hung single beam LB and liu xiaobo explosion-proof electric explosion-proof electric single-girder, explosion-proof hoist double beam systems. The weight of 1 t - 32 t. Working environment temperature is 20 ℃ - - 40 ℃. Wei hua explosion-proof products points three categories: in addition to the above gas explosion, and dust explosion, coal type explosion-proof, to apply to different places of explosion-proof. HB型防爆电动葫芦- Explosion-proof electric hoist - HB type 4YHⅡ冶金钢丝绳电动葫芦 4 yh Ⅱ metallurgical steel wire rope electric hoist YHⅡ型系列冶金葫芦，属第二代冶金钢丝绳电动葫芦，在主机总体设计、第二制动器和起升减速机、电机的设计上有重大突破。根据特殊场合的需要，应用了输出端制动、双速双绕组电机和M6工作级别的方形起升减速机。设计制造完全符合国家质量监督检验检疫总局特函【2007】375号文要求，经过国家型式试验和800小时超负荷、不间断的寿命试验，性能指标完全满足设计、使用要求，顺利通过国家质检总局评审验收，取得了特种设备型式试验合格证及制造资质。额定起重量为2—10吨。 YH type Ⅱ metallurgical hoist series, belong to the second generation of metallurgical steel wire rope electric hoist, overall design, the second brake on the host and the design of hoisting reducer, motor has a major breakthrough. According to the needs of special occasions, the application of the output side brake, double winding double speed motor and M6 working-level square hoisting speed reducer. Design and manufacture of full compliance with the state administration of quality supervision, inspection and quarantine, letter [2007] no. 2007, after national type test and 800 hours of life test, overload, uninterrupted performance indicators fully meet the requirements of design, use, smoothly through the national quality supervision, inspection and quarantine inspection acceptance, made of special equipment type test certificate and manufacturing qualification. Rated lifting weight for 2-10 tons. 冶金电动葫芦- Metallurgical electric hoist - 5KBK柔性组合式起重机 5 KBK flexible modular crane 柔性组合式起重机主要由KBK轨道、环链电动葫芦及其标准的安装组件构成。从只用几米直轨将两个工程直接连接起来的简单装置到复杂的悬挂单轨系统，从简单的手动控制到具有计算机集成控制的自动化系统。 KBK柔性组合式起重机设备更易于适应新的物料搬运要求。KBK只需将现有部件重新布置或加入些新部件就可实现轨道系统的改建或扩建。主要应用于比较精密的装配线，例如汽车装配线等。额定起重量在0.1—5吨。 Flexible modular crane is mainly composed of KBK track, chain electric hoist and its standard installation components. From two projects in just a few meters straight rail will directly connected simple device to complex suspension monorail system, from simple manual control to have a computer integrated control automation system. KBK flexible modular crane equipment makes it easier to adapt to the new material handling requirements. KBK simply rearrange existing components or add some new components can realize the rail system reconstruction or expansion. Mainly used in precision assembly line, such as automobile assembly line. Rated lifting weight at 0.1-5 tons.