导轨式爬架技术参数 Guide rail climbing scaffold technology parameters 　　架体宽度:0.7m The frame body width: 0.7 m 　　架体高度:4.5-5倍标准层 The frame body height: 4.5 5 times the standard layer 　　离墙距离：0.4m The distance from the wall: 0.4 m 　　架体步高1.8m Step 1.8 m high rack body 　　水平跨度0.7m、0.9m、1.2m、1.5m、1.8m Horizontal span 0.7 m, 0.9 m, 1.2 m, 1.5 m, 1.8 m 　　附着最大间距：直线7.0m，转角5.4m The biggest space: attached line 7.0 m, Angle of 5.4 m 　　结构施工两层作业面，每层不超过3kN/m² Two layers of structure construction operation, each layer of no more than 3 kn/m squared 　　装修施工三层作业面，每层不超过2kN/m² Three layer surface decorate construction, each layer of no more than 2 kn/m squared 　　电动葫芦7.5T 7.5 T electric hoist 　　升降速度13cm/min The lifting speed is 13 cm/min 　竖向主框架 The vertical main frame 　　竖向主框架由Φ48钢管和6.3#槽钢焊接而成。Φ48钢管用来制作主框架的横撑，它与附着支座上的防坠块相配合，起到防坠作用。6.3#槽钢背对焊接形成导轨，用来安装附墙支座的防倾导向装置，同时能保证架体在升降作业时的垂直运动。横杆和斜杆使主框架为整体单片式钢结构，横杆和斜杆可以将架体内外排连接成刚性整体，同时确保架体有可靠的力学传递。　　 The vertical main frame by Φ 48 steel tube and 6.3 # channel steel welded together. Φ 48 steel used to make the main framework of cross arm, adhere to support it and for block match, play a role for. 6.3 # channel steel back to welding forming guide to installation of the wall bearing the sway guide, at the same time can guarantee the frame body in vertical movement of lifting operations. Rails and diagonal making main frame for whole monolithic steel structure, beams and diagonal frame outside in the body can be wired into the overall rigidity, at the same time ensure that the frame body has reliable mechanical transmission.